'); doc.close(); }
80582 Axle Carr/Bearing Revo
RPM Axle Carriers/Steering Blocks

  (Click on Image to enlarge)

List Price:

(You can always remove this item later)

This is a set of optional RPM Axle Carriers/Steering Blocks
for the Traxxas Revo.
These will also work on the T/E Maxx 2.5R and 3.3 versions.

FEATURES: Constructed of molded composite material, black in color
Wall thickness around the pillow-balls has been increased by 40%
eliminating split walls
Over 20% more material supports the pillow-balls, preventing them
from pulling through
Redesigned reinforcing rib supporting tie rod mount
Redesigned boot lock tabs for easier removal of the silicone boots
Press-fit bearings in the carrier for reduced axle movement
Two-piece pillow-ball set screws use aluminum and Delrin for the
ultimate in holding power under extreme situations

INCLUDES: Two Axle Carriers/Steering Blocks
Two 12x21x5mm Inner Bearings
Two 6x15x5mm Outer Bearings
Four Aluminum Set Screws
Four Delrin Bushing Caps
Instruction Sheet

REQUIRES: Installing on axles, no modifications required

COMMENTS: Replacement Bearing Set, RPMC8570
Replacement Pillow-Ball Set Screws, RPMC0800

Do not use the Traxxas #5356 Long Travel Rocker Arm Set with these
Axle Carriers. Doing so will void the RPM warranty.